How to use Tulip® One-Step Fashion Dyes™
Set up work surface Protect work surface with plastic trash bags. Cover with a layer of paper towels. 
Prewash fabric Prewash fabric to remove sizing.
Do not use fabric softener or dryer sheet. Choose desired technique.
If using dry technique, dry fabric in dryer. If using wet technique, use direct from washer. 
Prepare fabric If using a flat method of dyeing, place plastic wrap or trash bag between layers
of fabric to keep dye from seeping through to other side. 
Mix dye Wearing rubber gloves, add water to dye bottle. Replace cap tightly.
Shake until dye is dissolved. Use full-strength for intense colors.
For a lighter shade of color, add more water using extra bottle if needed. 
Dye fabric Apply dye on fabric, checking to make sure dye has penetrated into folds.
Do not over saturate fabric. If dye is applied too close together the colors may become muddy. 
Wrap, let set, rinse Cover dyed fabric with plastic wrap to keep damp.
Let set 4-6 hours or longer for most intense colors. 
Cut rubber bands if used. Fill washer to large load setting with hottest water suitable for fabric
and a small amount of laundry soap. Wash and dry separately. 
Wash separately the first few times.
Do not allow dyed fabric to rest wet on other items.

Tips & Techniques
Plastic wrap can be used for larger areas. 
Place small items in laundry bag for washing. 
If darker dye drops on light dye rub off to remove excess. 
Make sure excess dye dust is removed from work area. It is invisible until it reacts with water. 
Create new colors by blending dyes. 
Dyes stored long than 1 hour after mixing will lose their strength (intensity) 
Precautionary note: Always wear gloves when working with dyes. 
Dry dye powder can cause an allergic reaction in some people. 
Avoid inhaling dye dust over an extended period. Use in well-ventilated area. 
Supervise children doing tie-dye projects.